$7.99 - $12.50
Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!
$9.79 - $12.99
- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors
Professional, shop-quality, version of the Wheels Mfg Universal Bottom Bracket Press, but with larger handles and brass inserts in the handle faces. Easy to use, this tool is made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. No more searching for the correct size drifts and parts. Just match up the drift to your frame's BB shell size and your bottom bracket's bearing size and press. 1/2" diameter threaded rod resists bending, allowing for the cups to align and press in straight. Drifts can also be used as a frame bottom bracket shell sizing guide! - Machined aluminum handles and drifts - Brass inserts in the tool faces allow each handle to turn freely against drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Zinc-plated 1/2" diameter threaded rod - Works with BB shells up to 132mm wide Fits: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm) - 22/24/30mm inner bearing diameters
$6.00 - $150.00
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Remove both Presta and Schrader valve cores with Stan's Core Remover. It's necessary to remove the valve core to inject sealant into the tire.
Speedplay cleats require routine lubrication for optimal performance and durability. Speedplay's SP-LUBE is specially formulated to dry instantly and bond to the pedal and cleat surfaces, creating a highly protective barrier that does not attract dirt. Use SP-LUBE regularly to ensure maximum functionality and improved pedal performance.
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes
- Improved sealing and durability - New rotating metal hose fittings - High-volume hose with clamp - Longer lasting - Must-have for all mechanics - DOT 5.1 - NOT compatible with RockShox fork bleed kit
The smartest, most convenient torque key now comes with bits to suit every need. Same great T-handle shape and reliable “click” when reaching the max torque. - Includes Hex 3/4/5, Torx T-20/25, and Philips #1 - 5nm max torque - Bit holder included
Hardened CRV steel bits. 3mm, 4mm & 5mm HEX sizes, T20 & T25 TORX 1/4" bit sizes. Also perfect for most brands of torque wrenches with the optional adapter below.
- Perfect companion for your Pedro's torque wrench - Bits made from premium S2 tool steel to ensure strength and lasting performance - Includes 16 hex and torx bits and 2 drive adapters in convenient holders - 50mm length bits in key sizes ensure component compatibility Pedro's Hex Bit Set II is designed to work with our torque wrenches offering an extensive range to handle most hex and torx needs. The set includes longer 50mm bits in key sizes to ensure compatibility and fit with all components where standard 25mm bits fall short. Bits are made from premium S2 tool steel for strength and lasting performance. Set includes: - Hex: 2, 2.5, 3, 4, 5, 6, & 8mm (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 & T30 (50mm) - Drive Adapters: 1/4-inch square to 1/4-inch hex & 1/4-inch hex to 1/4-inch square
The Torx-style fastener is quickly becoming standard fare on the modern bicycle. Having the right Torx wrenches in the right sizes is essential for the modern mechanic. The Pedro's L Torx Wrench Set is up to the challenge. We made these wrenches from heat-treated SNCM-V alloy steel to ensure superior strength and long-lasting performance. Pedro's Torx wrenches also feature extra length for better leverage and easy access and handling of hard-to-reach bolts. The set includes all the sizes you need, in convenient holder. - Made from heat-treated SNCM-V alloy steel to ensure long-lasting performance - Extra length provides great leverage and access to hard-to-reach bolts - Includes: T10, T15, T20, T25, T27, T30, & T40 sizes and convenient holder
The Pro Spoke Wrench takes ergonomics and versatility to the next level. The dual-sided design, with both 3-side and 4-side openings, features a reversible handle. When using either wrench opening, the curved and sculpted plastic handle fits perfectly in your fingers and positions them on either side of the spoke for ideal leverage and control. The wrench is investment cast, heat-treated steel ready for years of service and the precision-cut openings are perfectly sized for fit and speed.
Do you just LOVE fumbling with awkward tools, slamming your knuckles into sharp gear teeth, and making tasks harder than they should be? If so, you should stop reading and give your chain whip a big hug! However, if you've been looking to throw your chain whip into the woods, never to be seen again, you've come to the right place. Pedro's Vise Whip is simply a better solution for holding your cassette during removal. This innovative tool was developed by Pedro's in-close collaboration with legendary frame builder and cycling technical author Lennard Zinn. The Vise Whip is beautifully simple to use, adjusts to fit 11-23 tooth gears on all multi-gear cassettes (including 11-speed), and locks in place during use. Once you try it, you'll never go back to a chain whip again. - Secure, no-slip, no bloody knuckles, way to hold cassette during removal - once you try it you'll never go back! - Made from heat-treated tool steel for the ultimate in strength and long-lasting performance - Adjustable to fit 11-23 tooth gear sizes - Compatible with all multi-gear cassettes including 11-Speed
Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.
Park Tool's versatile and durable 8oz Shop Hammer is a perfectly balanced striking instrument built for a wide variety of shop uses. - Forged steel, precision machined striking face - Non marring, replaceable composite tip - Fiberglass shaft with soft touch grip - 8oz (225g) Head - Length: 12" (30.5cm) - Steel striking face: 1" (25mm) diameter - Plastic face: 1-1/4" (32mm) diameter - Replacement tip: Part #293-8
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush
Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
The Cyclone Chain Scrubber brushes are replaceable. The RBS-5 brush set includes the large side scrubbing brush, two roller brushes, and two wicking foam blocks.
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent
Park Tool's 238K Caliper Upgrade Kit will upgrade the TS-2 Professional Truing Stand to accept wider wheels and tires to increase the versatility of your TS-2 truiing stand. The set includes left and right caliper fingers, and one pair of the plastic removable tips. NOTE: The 238K will not allow the wide 29er wheels with plus-sized tires to be trued in the older TS-2 stands. Use the upright extensions TS-2EXT.2 to for truing 29er wheels with plus-sized tires.
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
The CRS-15.2 uses two different insert rings to install bearing races on the 1.5-inch and 1-1/4-inch forks. The bearing surface is spared a direct hit by using aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm. - SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40.
The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
Designed for the casual cyclist, the economical WTK-2 contains the tools needed for many basic adjustments and repairs at home or on the road.
The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)
The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
The Park FR-7 Freewheel Remover fits Falcon freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
Park's Hex Wrench Set offers 3, 4, 5, 6, 8, and 10mm Allen wrenches with chamfered tips for a great grip and easy use. The one-piece fiber-reinforced-resin handle is light, comfortable, slip-resistant, and 40% stronger than traditional steel handles.
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
This handy tool will save time and frustration! Quickly and accurately cuts hydraulic brake line then precisely installs hose barbs into the tubing when the brake line is either on or off the bike. - Cuts hydraulic brake hose (does not cut steel braided hydraulic hose) - Installs press-in style barbed hose inserts - Replaceable parts including push pin tip and stainless steel blade - Hard anodized body for improved tool wear - Lightweight, CNC machined aluminum body Replacement parts: - 2494K Cutting Blade (set of 2) - 2497 Push Pin Tip
Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-7 is a dual sided wrench that features a 30mm opening on one end and a 32mm opening on the other.
Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors
Once you try on Park's Heavy Duty Shop Apron, there's no going back to standard aprons. The SA-3 is made from heavy 10-ounce cotton canvas and has two rows of bar tack reinforced pockets for stashing pens, parts, tools, etc. The special crossback design removes pressure from the neck for all day comfort and a nylon quick release makes the apron easy to adjust and take off. This sweet apron is a full 35-inches in length and the bottom 7-inches of the apron can be snapped up for a custom height fit. Plus, an embroidered Park Tool logo makes the apron as good looking (even when it's dirty) as it is functional.
The AWS-1 is one of Park's most-popular tools because it fits the most-turned bicycle bolts. It features 4, 5, and 6mm Allen wrenches in a Y shape for excellent leverage. Each Allen is vinyl coated for comfort.
Park's I-Beam Mini Fold-Up Screwdriver/Torx Set includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver and a T25 Torx tool (for disc-rotor bolts). The I-Beam conveniently fits in pockets and packs, too.
The Magnetic Parts Bowl is the ideal solution for keeping track of small metal parts. It's 6 inches in diameter and featues an extra-strong magnet so bearings, cones and springs stay put and you don't lose them.
Park's Master Chain Tool is designed specifically to work with the tight tolerances and narrow profiles of 10- and 11-speed chains and all high-quality derailleur chains. It's made of tool steel for excellent durability and uses an integrated link pocket to ensure precise alignment. It also features perfectly contoured, cushioned handles for comfort and ease of use. This pro-level chain tool includes a removable anvil to peen Campagnolo 11-speed chains. (The CT-4.3 is not compatible with Wipperman chains.)
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
$23.95 - $54.95
The MT-10, 20, 30 and 40 are high quality folding take-along tools that feature forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.
Park's Open Ended Metric Wrench is a special thin wrench with 8 and 10mm openings perfect for adjusting the thin pivot-bolt nuts on sidepull brakes (and other hex nuts on your bicycle). This handy brake tool is made of durable tool steel that's nickel plated for corrosion resistance.
Park's Open Ended Metric Wrench is a thin wrench with 9 and 11mm openings so it's perfect for working on the pivot-bolt nuts on sidepull brakes (and derailleurs with hex nuts). This useful tool is nickel plated for durability.
A workstand is the backbone of any shop. Holding the bike at a convenient working height allows easy access for adjustments, cleaning and repair. The PCS-10.2 Deluxe Home Mechanic Repair Stand was designed and built using our 50 years of experience creating professional shop stands used in shops around the world. The unique three-point leg system and stout adjustable uprights create an extremely solid platform capable of handling bikes up to 80 lbs. (36kg). Easy to set up and use in a home shop, the PCS-10.2 also folds easily for transport or storage. - World famous Park Tool cam actuated, micro adjustable clamp that allows quick entry and exit and fits 1- to 3-inches (25mm–76mm) diameter tubes and seat posts of any shape and material - All steel structure for maximum stiffness and durability - Teardrop shaped tubing adds strength and ensures perfect positioning during use and folding - Folds quickly, easily and compactly for storage using aluminum quick release mechanisms and strong tubular support braces - Quick release height adjustment from 39- to 57-inches (99cm–145cm) - Durable textured powder coat finish - Super strong glass filled nylon composite fittings and top tube internals creating smooth rotation and secure positioning - Includes height adjustable compact tray to hold small parts, a few tools and the PTH-1 Paper Towel Holder (optional accessory)
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.
These shop-quality L-shaped hex wrenches have a genuine Bondhus balldriver tip on the long arm (excluding the 10mm) for hard-to-reach bolt heads and a straight tip on the short arm for high-torque applications. The HXS-1.2 includes a handy portable tool organizer/holder and it's hinged for easy access. • Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes • Wrench tips are precision chamfered for a clean, tight fit • Made from industrial-quality Bondhus Protanium high torque steel
$9.95 - $14.95
World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!
World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MWR-SET includes 6mm to 17mm wrenches with a 12-point two-way ratcheting box end. Forged from chrome vanadium steel, chrome-plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful! - Includes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, and 17mm wrenches
Page 1 of 14 Next page